DI-IPSC-81432A

System/Subsystem Design Description (SSDD)

This DID describes the system or subsystem design and architectural decisions, providing instructions for preparing System/Subsystem Design Descriptions with defined formats, contents, and data product requirements.

Approval DateAugust 10, 1999

AMSC NumberN7351

Preparing Activity—

Project Number—

OPRN/EC

DTIC ApplicableNo

GIDEP ApplicableNo

Limitation—

Applicable Forms—

Approval Limitation—

Form Version—

DID Formatdd_form_1664

963C CompliantNo

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

DI-IPSC-81432

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

The System/Subsystem Design Description (SSDD) describes the system- or subsystem-wide design and the architectural design of a system or subsystem. The SSDD may be supplemented by Interface Design Descriptions (IDDs) (DI-IPSC-81436A) and Database Design Descriptions (DBDDs) (DI-IPSC-81437A) as described below.

The SSDD, with it associated IDDs and DBDDs, is used as the basis for further system development. Throughout this Data Item Description (DID), the term "system" may be interpreted to mean "subsystem" as applicable. The resulting document should be titled System Design Description or Subsystem Design Description (SSDD).

This DID contains the format and content preparation instructions for the data product generated by specific and discrete task requirements as delineated in the contract.

This DID is used when the developer is tasked to define and record the design of a system or subsystem.

Design pertaining to interfaces may be presented in the SSDD or in IDDs. Design pertaining to databases may be presented in the SSDD or DBDDs.

The Contract Data Requirements List (CDRL)(DD 1423) will specify whether deliverable data are to be delivered on paper or electronic media; are to be in a given electronic form (such as ASCII, CALS, or compatible with a specified word processor or other support software); may be delivered in developer format rather than in the format specified herein; and may reside in a computer-aided software engineering (CASE) or other automated tool rather than in the form of a traditional document.

Preparation Instructions

1Reference documents.None.

2General instructions.

2.1Automated techniques.Use of automated techniques is encouraged. The term "document" in this DID means a collection of data regardless of its medium.

2.2Alternate presentation styles.Diagrams, tables, matrices, and other presentation styles are acceptable substitutes for text when data required by this DID can be made more readable using these styles.

3Format.Following are the format requirements.

3.1Title page or identifier.The document shall include a title page containing, as applicable: document number; volume number; version/revision indicator; security markings or other restrictions on the handling of the document; date; document title; name, abbreviation, and any other identifier for the system, subsystem, or item to which the document applies; contract number; CDRL item number; organization for which the document has been prepared; name and address of the preparing organization; and distribution statement. For data in a database or other alternative form, this information shall be included on external and internal labels or by equivalent identification methods.

3.2Table of contents.The document shall contain a table of contents providing the number, title, and page number of each titled paragraph, figure, table, and appendix. For data in a database or other alternative form, this information shall consist of an internal or external table of contents containing pointers to, or instructions for accessing, each paragraph, figure, table, and appendix or their equivalents.

3.3Page numbering/labeling.Each page shall contain a unique page number and display the document number, including version, volume, and date, as applicable. For data in a database or other alternative form, files, screens, or other entities shall be assigned names or numbers in such a way that desired data can be indexed and accessed.

3.4Response to tailoring instructions.If a paragraph is tailored out of this DID, the resulting document shall contain the corresponding paragraph number and title, followed by "This paragraph has been tailored out." For data in a database or other alternative form, this representation need occur only in the table of contents or equivalent.

3.5Multiple paragraphs and subparagraphs.Any section, paragraph, or subparagraph in this DID may be written as multiple paragraphs or subparagraphs to enhance readability.

3.6Standard data descriptions.If a data description required by this DID has been published in a standard data element dictionary specified in the contract, reference to an entry in that dictionary is preferred over including the description itself.

3.7Substitution of existing documents.Commercial or other existing documents may be substituted for all or part of the document if they contain the required data.

4Content.The numbers shown designate the paragraph numbers to be used in the document.

4.1Scope.This section shall be divided into the following paragraphs.

4.1.1Identification.This paragraph shall contain a full identification of the system and the software to which this document applies, including, as applicable, identification number(s), title(s), abbreviation(s), version number(s), and release number(s).

4.1.2System overview.This paragraph shall briefly state the purpose of the system and the software to which this document applies. It shall describe the general nature of the system and software; summarize the history of system development, operation, and maintenance; identify the project sponsor, acquirer, user, developer, and support agencies; identify current and planned operating sites; and list other relevant documents.

4.1.3Document overview.This paragraph shall summarize the purpose and contents of this document and shall describe any security or privacy considerations associated with its use.

4.2Referenced documents.This section shall list the number, title, revision, and date of all documents referenced in this document. This section shall also identify the source for all documents not available through normal Government stocking activities.

4.3System-wide design decisions.This section shall be divided into paragraphs as needed to present system-wide design decisions, that is, decisions about the system's behavioral design (how it will behave, from a user's point of view, in meeting its requirements, ignoring internal implementation) and other decisions affecting the selection and design of system components. If all such decisions are explicit in the requirements or are deferred to the design of the system components, this section shall so state. Design decisions that respond to requirements designated critical, such as those for safety, security, or privacy, shall be placed in separate subparagraphs. If a design decision depends upon system states or modes, this dependency shall be indicated. Design conventions needed to understand the design shall be presented or referenced. Examples of system-wide design decisions are the following:

4.3.1Design decisions regarding inputs the system will accept and outputs it will produce, including interfaces with other systems, configuration items, and users (4.3.2 of this DID identifies topics to be considered in this description).If part or all of this information is given in Interface Design Descriptions (IDDs), they may be referenced.

4.3.2Design decisions on system behavior in response to each input or condition, including actions the system will perform, response times and other performance characteristics, description of physical systems modeled, selected equations/algorithms/rules, and handling of unallowed inputs or conditions.

4.3.3Design decisions on how system databases/data files will appear to the user (4.3.2 of this DID identifies topics to be considered in this description).If part or all of this information is given in Database Design Descriptions (DBDDs), they may be referenced.

4.3.4Selected approach to meeting safety, security, and privacy requirements.

4.3.5Design and construction choices for hardware or hardware-software systems, such as physical size, color, shape, mass, materials, and markings.

4.3.6Other system-wide design decisions made in response to requirements, such as selected approach to providing required flexibility, availability, and maintainability.

4.4System architectural design.This section shall be divided into the following paragraphs to describe the system architectural design. If part or all of the design depends upon system states or modes, this dependency shall be indicated. If design information falls into more than one paragraph, it may be presented once and referenced from the other paragraphs. Design conventions needed to understand the design shall be presented or referenced. Note: For brevity, this section is written in terms of organizing a system directly into Hardware Configuration Items (HWCIs), Computer Software Configuration Items (CSCIs), and manual operations, but should be interpreted to cover organizing a system into subsystems, organizing a subsystem into HWCIs, CSCIs, and manual operations, or other variations as appropriate.

4.4.1System components.This paragraph shall:

4.4.1.1Identify the components of the system (HWCIs, CSCIs, and manual operations).Each component shall be assigned a project-unique identifier. Note: a database may be treated as a CSCI or as part of a CSCI.

4.4.1.2Show the static (such as "consists of") relationship(s) of the components.Multiple relationships may be presented, depending on the selected design methodology.

4.4.1.3State the purpose of each component and identify the system requirements and system-wide design decisions allocated to it.(Alternatively, the allocation of requirements may be provided in 4.5.1.)

4.4.1.4Identify each component's development status/type, if known (such as new development, existing component to be reused as is, existing design to be reused as is, existing design or component to be reengineered, component to be developed for reuse, component planned for Build N, etc.).For existing design or components, the description shall provide identifying information, such as name, version, documentation references, location, etc.

4.4.1.5For each computer system or other aggregate of computer hardware resources identified for use in the system, describe its computer hardware resources (such as processors, memory, input/output devices, auxiliary storage, and communications/network equipment).Each description shall, as applicable, identify the configuration items that will use the resource, describe the allocation of resource utilization to each CSCI that will use the resource (for example, 20% of the resource's capacity allocated to CSCI 1, 30% to CSCI 2), describe the conditions under which utilization will be measured, and describe the characteristics of the resource:

4.4.1.5.1Descriptions of computer processors shall include, as applicable, manufacturer name and model number, processor speed/capacity, identification of instruction set architecture, applicable compiler(s), word size (number of bits in each computer word), character set standard (such as ASCII, EBCDIC), and interrupt capabilities.

4.4.1.5.2Descriptions of memory shall include, as applicable, manufacturer name and model number and memory size, type, speed, and configuration (such as 256K cache memory, 16MB RAM (4MB x 4)).

4.4.1.5.3Descriptions of input/output devices shall include, as applicable, manufacturer name and model number, type of device, and device speed/capacity.

4.4.1.5.4Descriptions of auxiliary storage shall include, as applicable, manufacturer name and model number, type of storage, amount of installed storage, and storage speed.

4.4.1.5.5Descriptions of communications/network equipment, such as modems, network interface cards, hubs, gateways, cabling, high speed data lines, or aggregates of these or other components, shall include, as applicable, manufacturer name and model number, data transfer rates/capacities, network topologies, transmission techniques, and protocols used.

4.4.1.5.6Each description shall also include, as applicable, growth capabilities, diagnostic capabilities, and any additional hardware capabilities relevant to the description.

4.4.1.6Present a specification tree for the system, that is, a diagram that identifies and shows the relationships among the planned specifications for the system components.

4.4.2Concept of execution.This paragraph shall describe the concept of execution among the system components. It shall include diagrams and descriptions showing the dynamic relationship of the components, that is, how they will interact during system assembly, storage, deployment, and operation, including, as applicable, flow of execution control, data flow, dynamically controlled sequencing, state transition diagrams, timing diagrams, priorities among components, handling of interrupts, timing/sequencing relationships, exception handling, concurrent execution, dynamic allocation/deallocation, dynamic creation/deletion of objects, processes, tasks, assembly, storage, deployment, and other aspects of dynamic behavior.

4.4.3Interface design.This paragraph shall be divided into the following subparagraphs to describe the interface characteristics of the system components. It shall include both interfaces among the components and their interfaces with external entities such as other systems, configuration items, and users. Note: There is no requirement for these interfaces to be completely designed at this level; this paragraph is provided to allow the recording of interface design decisions made as part of system architectural design. If part or all of this information is contained in Interface Design Descriptions (IDDs) or elsewhere, these sources may be referenced.

4.4.3.1Interface identification and diagrams.This paragraph shall state the project-unique identifier assigned to each interface and shall identify the interfacing entities (systems, configuration items, users, etc.) by name, number, version, and documentation references, as applicable. The identification shall state which entities have fixed interface characteristics (and therefore impose interface requirements on interfacing entities) and which are being developed or modified (thus having interface requirements imposed on them). One or more interface diagrams shall be provided, as appropriate, to depict the interfaces.

4.4.3.2Project-unique identifier of interface.This paragraph (beginning with 4.3.2) shall identify an interface by project-unique identifier, shall briefly identify the interfacing entities, and shall be divided into subparagraphs as needed to describe the interface characteristics of one or both of the interfacing entities. If a given interfacing entity is not covered by this SSDD (for example, an external system) but its interface characteristics need to be mentioned to describe interfacing entities that are, these characteristics shall be stated as assumptions or as "When [the entity not covered] does this, [the entity that is covered] will...." This paragraph may reference other documents (such as data dictionaries, standards for protocols, and standards for user interfaces) in place of stating the information here. The design description shall include the following, as applicable, presented in any order suited to the information to be provided, and shall note any differences in these characteristics from the point of view of the interfacing entities (such as different expectations about the size, frequency, or other characteristics of data elements):

4.4.3.2.1Priority assigned to the interface by the interfacing entity(ies).

4.4.3.2.2Type of interface (such as real-time data transfer, storage-and-retrieval of data, etc.) to be implemented.

4.4.3.2.3Characteristics of individual data elements that the interfacing entity(ies) will provide, store, send, access, receive, etc., such as:

4.4.3.2.3.1Names/identifiers.

4.4.3.2.3.1.1Project-unique identifier.

4.4.3.2.3.1.2Non-technical (natural-language) name.

4.4.3.2.3.1.3DoD standard data element name.

4.4.3.2.3.1.4Technical name (e.g., variable or field name in code or database).

4.4.3.2.3.1.5Abbreviation or synonymous names.

4.4.3.2.3.2Data type (alphanumeric, integer, etc.).

4.4.3.2.3.3Size and format (such as length and punctuation of a character string).

4.4.3.2.3.4Units of measurement (such as meters, dollars, nanoseconds).

4.4.3.2.3.5Range or enumeration of possible values (such as 0-99).

4.4.3.2.3.6Accuracy (how correct) and precision (number of significant digits).

4.4.3.2.3.7Priority, timing, frequency, volume, sequencing, and other constraints, such as whether the data element may be updated and whether business rules apply.

4.4.3.2.3.8Security and privacy constraints.

4.4.3.2.3.9Sources (setting/sending entities) and recipients (using/receiving entities).

4.4.3.2.4Characteristics of data element assemblies (records, messages, files, arrays, displays, reports, etc.) that the interfacing entity(ies) will provide, store, send, access, receive, etc., such as:

4.4.3.2.4.1Names/identifiers.

4.4.3.2.4.1.1Project-unique identifier.

4.4.3.2.4.1.2Non-technical (natural language) name.

4.4.3.2.4.1.3Technical name (e.g., record or data structure name in code or database).

4.4.3.2.4.1.4Abbreviations or synonymous names.

4.4.3.2.4.2Data elements in the assembly and their structure (number, order, grouping).

4.4.3.2.4.3Medium (such as disk) and structure of data elements/assemblies on the medium.

4.4.3.2.4.4Visual and auditory characteristics of displays and other outputs (such as colors, layouts, fonts, icons and other display elements, beeps, lights).

4.4.3.2.4.5Relationships among assemblies, such as sorting/access characteristics.

4.4.3.2.4.6Priority, timing, frequency, volume, sequencing, and other constraints, such as whether the assembly may be updated and whether business rules apply.

4.4.3.2.4.7Security and privacy constraints.

4.4.3.2.4.8Sources (setting/sending entities) and recipients (using/receiving entities).

4.4.3.2.5Characteristics of communication methods that the interfacing entity(ies) will use for the interface such as:

4.4.3.2.5.1Project-unique identifier(s).

4.4.3.2.5.2Communication links/bands/frequencies/media and their characteristics.

4.4.3.2.5.3Message formatting.

4.4.3.2.5.4Flow control (such as sequence numbering and buffer allocation).

4.4.3.2.5.5Data transfer rate, whether periodic/aperiodic, and interval between transfers.

4.4.3.2.5.6Routing, addressing, and naming conventions.

4.4.3.2.5.7Transmission services, including priority and grade.

4.4.3.2.5.8Safety/security/privacy considerations, such as encryption, user authentication, compartmentalization, and auditing.

4.4.3.2.6Characteristics of protocols that the interfacing entity(ies) will use for the interface, such as:

4.4.3.2.6.1Project-unique identifier(s).

4.4.3.2.6.2Priority/layer of the protocol.

4.4.3.2.6.3Packeting, including fragmentation and reassembly, routing, and addressing.

4.4.3.2.6.4Legality checks, error control, and recovery procedures.

4.4.3.2.6.5Synchronization, including connection establishment, maintenance, termination.

4.4.3.2.6.6Status, identification, and any other reporting features.

4.4.3.2.7Other characteristics, such as physical compatibility of the interfacing entity(ies) (dimensions, tolerances, loads, voltages, plug compatibility, etc.).

4.5Requirements traceability.This section shall contain:

4.5.1Traceability from each system component identified in this SSDD to the system requirements allocated to it.(Alternatively, this traceability may be provided in 4.4.1.)

4.5.2Traceability from each system requirement to the system components to which it is allocated.

4.6Notes.This section shall contain any general information that aids in understanding this document (e.g., background information, glossary, rationale). This section shall include an alphabetical listing of all acronyms, abbreviations, and their meanings as used in this document and a list of any terms and definitions needed to understand this document.

4.6.1Appendices.Appendices may be used to provide information published separately for convenience in document maintenance (e.g., charts classified data). As applicable, each appendix shall be referenced in the main body of the document where the data would normally have been provided. Appendixes may be bound as separate documents for ease in handling. Appendixes shall be lettered alphabetically (A, B, etc.).

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer