DI-MISC-80876

Welding Procedure Qualification Test Report

The Welding Procedure Qualification Test Report provides the data required to establish whether the contractor can produce acceptable welds meeting destructive and non-destructive test requirements for base metals, filler materials, and welding processes.

Approval DateJune 30, 1989

AMSC NumberN4783

Preparing Activity—

Project Number—

OPRSH/05M2

DTIC Applicable—

GIDEP Applicable—

Limitation—

Applicable Forms—

Approval Limitation—

Form VersionJUN 86

DID Formatdd_form_1664

963C CompliantNo

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

UDI-H-23384

DI-MISC-80875

Description & Purpose

3.1 The Welding Procedure Qualification Test Report provides the data required to establish whether or not the contractor can produce acceptable welds which meet the destructive and non-destructive test requirements for the base metals, filler materials and welding processes involved.

Application & Interrelationship

7.1 This DID contains the format and content preparation instructions for Welding Procedure Qualification Test Report resulting from the work task described by 4.6 of MIL-STD-248D.

7.2 This DID is applicable to fabrication of components where welding is part of the fabrication process. The Test Report completely identifies the welding process and results of tests performed to prove the effectiveness of the weld.

7.3 This DID should always be used with DI-MISC-80875 when procedure approval is being requested.

7.4 This DID supersedes UDI-H-23384.

Use & Relationship

—

Preparation Instructions

10.1Referenced documentsThe applicable issue of the documents cited herein, including their approval date and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

10.2FormatThe report shall be prepared on standard 8-1/2 X 11 inch bond paper in contractor format. First page of the report shall include company letterhead.

10.3ContentThe report shall contain the signature of a responsible company officer, report number, and date. The Weld Procedure Qualification Test Report shall contain the pertinent data as listed in figure 11 of MIL-STD-248D for each weld procedure being qualified.

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer