DI-NUOR-82447
Cruise Missile (CM) Electrical Interface Control Drawing (EICD)
The CM EICD is a signature-controlled drawing set detailing the cruise missile/warhead interface and associated electrical systems used to document and control changes to the nuclear system.
Approval DateMay 13, 2024
AMSC NumberF10480
Preparing Activity27 (AFNWC)
Project NumberNUOR-2023-003
OPR—
DTIC ApplicableNo
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Related
DI-NUOR-82445DI-NUOR-81409
Application & Interrelationship
—
Use & Relationship
The CM EICD is a signature-controlled drawing set detailing the cruise missile/warhead interface and associated electrical systems. CM EICD must contain information extracted from the contractor documentation in order to complete a composite drawing reflecting the basic electrical interface features. The CM EICD provides a means to document and control changes to the nuclear system throughout the life of the CM and nuclear warhead Weapon System.
a. This Data Item Description (DID) contains the format and content preparations instructions for data resulting from the work task described by the following documents: MIL-STD-1822, Nuclear Compatibility Certification of Nuclear Weapon Systems, Subsystems and Support Equipment.
(MIL-STD-1822 is available online at https://quicksearch.dla.mil, and copies of the AMAC POG System Specifications are available from the AFNWC, 8601 Frost Ave SE, Building 20203, Kirtland AFB, NM 87117-5624.)
b. This DID is related to DI-NUOR-82445, Cruise Missile Monitor and Control Final Design Approval Report (FDAR) and DI-NUOR-81409, Certification Requirements Plan (CRP).
(Copies of the DIDs are available online at https://quicksearch.dla.mil.)
Preparation Instructions
1Reference Documents.The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices and revisions, shall be as specified in the solicitation or contract.
2Format.Contractor format is acceptable.
3Content.The CM EICD shall provide detail of the electrical power and logical signal interfaces associated with the cruise missile electrical systems used to monitor and control the missile and missile-to-warhead interfaces on the cruise missile.
3.1The CM EICD shall provide engineering data and descriptions that define:
3.1.1The general system information, which shall include CM EICD introduction and index; abbreviations; acronyms; CM monitor and control and delivery system block diagrams; system definition and overview; an interface table describing warheads, training devices and test sets; and a nuclear configuration table identifying hardware and its location and access panel locations. The information shall include CM system logical signal interfaces throughout the CM system components as they relate to monitoring and controlling of logic and power signals to the nuclear warhead interface.
3.1.2The physical interfaces showing wire identification, wire gauges, wire lengths, bulkhead and splice locations, and connector pin identification.
3.2The CM EICD shall provide:
3.2.1Signature blocks for responsible agency representatives.
3.2.2System block diagram of the CM electrical and message processing systems with respect to the Aircraft Monitor and Control (AMAC) signals, messages, navigation data, and power provided from the aircraft and at the warhead interface.
3.2.3CM system schematic.
3.2.4CM component descriptions.
3.2.5Carriage and release power draw with respect to time.
3.2.6List of nuclear warheads to be used on CM.
3.2.7List of CM test assets.
3.2.8List of ancillary test equipment to be used with the CM and nuclear warhead.
3.2.9List of training devices to be used with the CM and nuclear warhead.
3.2.10List of drawings that define the nuclear warhead, ancillary test equipment, and training devices appropriate to the CM and nuclear warhead.
Schema v3.0Community-maintained · Verify against ASSIST