DI-QCIC-80376A
Incoming Inspection Summary Report
The Incoming Inspection Summary Report summarizes the results of incoming inspection, including contractor source inspection, of all parts associated with an equipment type to evaluate the quality of material received from outside sources.
Approval DateNovember 21, 2006
AMSC Number7654
Preparing Activity—
Project Number—
OPRNS/I5223
DTIC ApplicableNo
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
The Incoming Inspection Summary Report is a summary of the results of an incoming inspection including contractor source inspection of all parts associated with an equipment type. Each summary report is limited to an equipment type such as space, ground, etc.
The report is used to evaluate the quality of material being received from outside sources.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task equipment for this data included in the contract.
This report is required when equipment parts are subject to incoming inspections.
This DID supercedes DI-QCIC-80376
Preparation Instructions
1Reference documents.None.
2Format:The Incoming Inspection Summary Report shall be in contractor format.
3Content:The summary report shall contain the following information:
3.1A title page which shall contain the following:
3.1.2Equipment nomenclature.
3.1.4Security classification of the report.
3.1.6Name(s) and official title(s) of the preparer(s) of the report.
3.1.7Signature of an authorized company representative.
3.2Brief introduction that includes the scope and purpose of the report.
3.3Brief description of the incoming test procedures and objectives.
3.4A summary of all parts receiving an incoming inspection in tabular form, whenever possible, shall include the following information:
3.4.1Part type, part number, vendor, and vendor part number.
3.4.2Nonconforming Material Report (NCMR) Number (if applicable).
3.4.3Lot size (by lot date code).
3.4.4Quantity inspected - by lot date code (including sampling level used, if applicable).
3.4.5Quantity rejected - by lot date code.
3.4.7Disposition (including corrective action implemented).
3.5Histograms which reflect the recorded variables in 3.4 above.
Schema v3.0Community-maintained · Verify against ASSIST 