DI-QCIC-81706
Destructive Physical Analysis Plan
The Destructive Physical Analysis Plan describes how a contractor will establish sampling, acceptance, and rejection criteria for destructive physical analysis of parts used in high reliability spacecraft equipment.
Approval DateNovember 24, 2006
AMSC Number7660
Preparing Activity—
Project Number—
OPRNS/I5231
DTIC ApplicableNo
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
The Destructive Physical Analysis plan identifies in detail how the contractor will establish sampling, acceptance, and rejection criteria for DPA of parts for use in high reliability spacecraft equipment.
This Data Item Description (DID) contains the format and content preparation instruction for the data generated by the specific and discrete task requirements as delineated in the contract. Refer to MIL-STD-1580(B)1, "Destructive Physical Analysis (DPA) for Electronic, Electromagnetic, and Electromechanical Parts," (entire document) for further guidance on the part types subject to DPA.
Preparation Instructions
1Reference documents.The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the current issue of the DODISS at the time of the solicitation.
2Format.The Destructive Physical Analysis plan shall be in the contractor's format.
3Content.The Destructive Physical Analysis (DPA) plan shall contain the following:
3.1Lot sampling technique.Describes the method of conducting the lot sampling for each device type.
3.2Lot acceptance criteria.Describes the acceptance criteria that will be applied against each device type.
3.3Lot rejection criteria.Describes the rejection criteria that will be applied against each device type.
3.4Sample storage.Describes how the DPA samples will be identified for retention and how and where the samples will be stored throughout the duration of the contract.
3.5Photographs.Describes the information that will be contained in the photographs taken of each lot sample in order to properly match the photographs to the DPA sample concerned.
Schema v3.0Community-maintained · Verify against ASSIST 