DI-QCIC-81890

Qualification Test Report (QTR)

The QTR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.

Approval DateJanuary 18, 2013

AMSC NumberN9312

Preparing Activity—

Project Number—

OPRAS/PMA-251

DTIC Applicable—

GIDEP Applicable—

Limitation—

Applicable Forms—

Approval Limitation—

Form Version—

DID Formatfree_text

963C CompliantNo

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).

Preparation Instructions

1Format.Contractor's format is acceptable.

2Content.The QTR shall contain the following:

2.1Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.

2.2Date and location of test or evaluation.

2.3The operator who conducted the test.

2.4Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.

2.5Contractor's conclusions, corrective action anticipated recommendation to correct deficiencies, and suggested improvements based on evaluation of the test.

2.6All analysis and supporting data.

2.7All data sheets.

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer