DI-QCIC-81891

Acceptance TEST Report (ATR)

This DID provides format, content, and intended use information for the Acceptance Test Report (ATR), which details qualification test results to ensure system conformance with specifications and contract requirements.

Approval DateJanuary 18, 2013

AMSC NumberN9313

Preparing Activity—

Project Number—

OPRAS/PMA251

DTIC Applicable—

GIDEP Applicable—

Limitation—

Applicable Forms—

Approval Limitation—

Form Version—

DID Formatdd_form_1664

963C CompliantNo

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

The ATR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.

This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).

Preparation Instructions

1Format.Contractor's format is acceptable.

2Content.The ATR shall contain the following:

2.1Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.

2.2Date and location of test or evaluation.

2.3The operator who conducted the test.

2.4Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.

2.5Contractor's conclusions, corrective action anticipated, recommendation to correct. deficiencies, and suggested improvements based on evaluation of the test.

2.6All analysis and supporting data.

2.7All data sheets.

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer