DI-SAFT-80901C
Federal Aviation Administration Airworthiness Substantiation Data
Specifies the FAA airworthiness certification and existing engineering data required for commercial derivative aircraft, systems, engines, and components owned by the US Government.
Approval DateApril 19, 2013
AMSC NumberN9363
Preparing Activity—
Project Number—
OPRAS/PMA-207
DTIC Applicable—
GIDEP Applicable—
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
This data package shall include the data required to substantiate the FAA Airworthiness Certification and existing engineering data developed for commercial derivative aircraft, aircraft systems, engines, and components. This data package is used for airworthiness certification, modifications, testing, and flight clearance substantiation for commercial derivative aircraft owned by the US Government.
This Data Item Description (DID) contains the format, content, and intended use information, and content preparation instructions for the data product resulting from the work task described in the contract Statement of Work or Performance Work Statement.
Preparation Instructions
1FormatThe datum shall be in Contractor format or as designated per FAA regulations.
2ContentThe following FAA airworthiness certification data and existing engineering data for a public use-commercial derivative aircraft, aircraft systems, engines, and components are to be provided per contract requirements:
2.1Aerodynamic Performance Data
2.2Aerodynamic Analysis and Test Data
2.3Stability and Control analysis and Test Data
2.4Airframe Stress Analysis and Test Data
2.5Airframe Fatigue Analysis and Test Data
2.6Structural Description and Design Data
2.7Aerodynamic Description and Design Data
2.9Landing Gear system Design and Analysis Data
2.10Landing Gear System Test Data
2.11Flutter Analysis and Test Data
2.12Mechanical and Electrical Source Control Drawings
2.13General Arrangement Drawings
2.14Inboard Profile Drawings
2.15Structural Loads Internal and External Data
2.16Propulsion Design and Description
2.17Engine Installation description
2.18Engine Performance Analysis and Test Data
2.19APU Installation Description
2.20APU Design, Analysis, and Test Data
2.21Ancillary Propulsion Equipment Design and Test Data
2.22Hydraulic Systems Design, Analysis, and Test
2.23Pneumatic Systems Design, Analysis, and Test Data
2.24Flight Control System Design, Analysis, and Test Data
2.25Environmental Control Systems Design, Analysis, and Test Data
2.26Materials Verification Data
2.27Electrical Loads Analysis and Test Data
2.28Electromagnetic Interference Test Data
2.29Electrical Wiring Diagram
2.30Antennae System and Location Design, Analysis, and Test Data
2.31Weight and Balance Data
2.32Fire Protection Analysis Data
2.33Fuel Tank Safety (SFAR 88) Analysis Data
2.34Lightening Protection Analysis Data
2.36Oxygen Systems Design, Analysis, and Test Data
2.37Flight Data Recorder System Design, Analysis, and Test Data
2.38Human Factors Analysis Data
2.39Environmental Analysis Data
2.40Safety Assessment Data
2.41Ground Vibration/Dynamic/Rap or Plink Data
2.43Aircraft Conformity Report
Schema v3.0Community-maintained · Verify against ASSIST 