DI-SAFT-81125
Hazard Assessment Test Report
Describes the contents of a hazard assessment test report used to evaluate the safety and insensitive munitions characteristics of non-nuclear ordnance.
Approval DateMarch 8, 1991
AMSC NumberN6025
Preparing Activity—
Project Number—
OPROS
DTIC Applicable—
GIDEP Applicable—
Limitation—
Applicable Forms—
Approval Limitation—
Form VersionAPR 89
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Description & Purpose
This item describes the contents of a hazard assessment test report. The test report is used to evaluate the safety and insensitive munitions characteristics of non-nuclear ordnance.
Application & Interrelationship
This Data Item Description (DID) contains the format and content preparation instructions for data generated by the "Hazard assessment test report" paragraph of MIL-STD-2105.
The following DID is used in conjunction with this DID and applies only if listed on the DD Form 1423 incorporated into the contract:
DI-T-30714 Master Test Plan/Program Test Plan
Preparation Instructions
1Reference documentsThe applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2FormatThe test report shall be formatted in accordance with MIL-STD-831 or the contractor's style as specified in the contract.
3ContentsThe report shall include the following:
3.1The name (type) of the test(s) covered by the report
3.2Rationale for any deviations from the test plan
3.3Test item configuration and identification
3.5Test resultsSee 4 below.
3.6Safety and vulnerability-related conclusions drawn from the test results
4Test resultsThe test results shall be described using the terms and definitions as specified in MIL-STD-2105.
Schema v3.0Community-maintained · Verify against ASSIST