DI-SAFT-81135
Shaped Charge Jet Impact Test Data
Specifies the format and content preparation instructions for the test and inspection conditions and results of a shaped charge jet impact test used to evaluate a test item's response to jet impact.
Approval DateMarch 8, 1991
AMSC NumberN6035
Preparing Activity—
Project Number—
OPROS
DTIC Applicable—
GIDEP Applicable—
Limitation—
Applicable Forms—
Approval Limitation—
Form VersionAPR 89
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Description & Purpose
This data comprises the test and inspection conditions and results of the shaped charge jet impact test. It is used to evaluate the response of the test item impacted by the jet of a shaped charge.
Application & Interrelationship
This Data Item Description (DID) contains the format and content preparation instructions for data generated by the shaped charge jet impact test of MIL-STD-2105.
The following DID is used in conjunction with this DID and applies only if listed on the DD Form 1423 incorporated into the contract:
DI-SAFT-81126 Photographic Requirements
Preparation Instructions
1FormatThe shaped charge jet impact test data shall be formatted in accordance with figures 1, 2 and 3.
2ContentThe shaped charge jet impact test data shall include the information of figures 1, 2 and 3 and the following:
2.1Location and identification of the post-test remainsLocation and identification of the post-test remains depicted onto figure 2.
2.2Description, location (linear and angular distance from original test position), dimensions and weightDescription, location (linear and angular distance from original test position), dimensions and weight of the post-test remains tabulated onto figure 3.
Figures

Figure 1. Shaped charge jet impact test data sheet.

Figure 2. Post-test remains map.

Figure 3. Post-test remains tabulation.
Schema v3.0Community-maintained · Verify against ASSIST