DI-SAFT-81299C
Explosive Hazard Classification Data Report (EHCDR)
Specifies the content and format for a report used to obtain the information needed to assign hazard classification, storage compatibility group, and DoT marking for a new explosive item.
Approval DateJune 12, 2015
AMSC NumberF9556
Preparing Activity40 (AFMC/SE)
Project NumberSAFT-2015-009
OPR—
DTIC ApplicableNo
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Related
DI-SAFT-80101DI-SAFT-80105DI-SAFT-80106
Application & Interrelationship
—
Use & Relationship
The Explosive Hazard Classification Data Report is used to obtain the necessary information for assigning hazard classifications, such as hazard class/division, storage compatibility group, and Department of transportation (DoT) marking. These classifications establish the procedures for the storage and transportation of the item for all user elements.
a. This Data Item Description (DID) is applicable to the acquisition of any new explosive item or component which has not previously received an approved hazard classification.
b. This DID contains the content and format preparation instructions for the data products generated by MIL-STD-882, System Safety, and any specific and discrete task requirements as delineated in the contract.
c. This DID is related to DI-SAFT-80101, System Safety Hazard Analysis Report (SSHAR); DI-SAFT-80105, System Safety Program Progress Report (SSPPR); and DI-SAFT-80106, Health Hazard Assessment Report (HHAR).
(Copies of MIL-STD-882 and these DIDs are available online at http://quicksearch.dla.mil.)
d. This DID supersedes DI-SAFT-81299B.
Preparation Instructions
1Reference documentsThe applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2FormatThe EHCDR shall be in contractor format.
3ContentThe EHCDR shall contain the following:
3.1Type of classificationInclude a statement as to the type of classification being sought, either interim or final.
3.2Hazard classification dataThe data necessary for assignment of hazard classification will be supplied as shown below, using additional pages if sufficient space is not available. The "used on" or "used with" hardwire item(s) will be identified, including their ancillary or delivery equipment. For interim hazard classifications, some of this data may not be available, but all should be available for final hazard classifications.
3.2.1Nomenclature(see FED-STD-5, Standard Guides for Preparation of Proposed Item Logistics Data Records.)
(Copies of this document are available online at http://quicksearch.dla.mil.)
3.2.2Part number(s) and Commercial and Government Entity (CAGE) numberPrime contractor and vendor(s).
3.2.3National stock number (NSN)
3.2.4System used onSystem in which the subject item is associated.
3.2.5Next assemblyNext higher assembly subject item is a part of.
3.2.6SizeSize of unpacked item.
3.2.7WeightWeight of unpacked item.
3.2.8Explosive or chemical formulationInclude type, composition, and total weight of each explosive or chemical subassembly in the item (e.g., detonator, booster, squib, rocket motor, etc.).
3.2.9Weights of explosive or chemical material
aNet explosive weightTotal weight of all materials that mass detonate (i.e., Class/Division 1.1).
bNet propellant weightTotal weight of all propellant and pyrotechnic material (i.e., Class/Division 1.3).
cExplosive weight for Quantity-Distance (Q-D) determinationsNet explosive weight, net propellant weight, or some combination of the two, according to results of testing and/or current policy for Q-D computations. Only this weight may be used directly in Q-D computations. Include equation used to calculate TNT equivalent weight and the reference where the equation was obtained.
3.2.10Items containing a liquid or gas
aName or type of liquid or gas
cIf pressurized, what pressure
3.2.11NarrativeA narrative description of the item.
3.2.12FunctioningStep-by-step, on how the item functions and its relation to higher assemblies.
3.2.13IllustrationIllustration of the configuration of the explosive item and the relationship of the item's parts as assembled. An illustration of the relationship of the explosive item to other items in the next higher assembly.
aHow item is packed (narrative description)
bNumber of items per inner package
cNumber of inner packages per outer package
dUnited Nations (UN) identification code, Department of Transportation (DOT) Specification numberUnited Nations (UN) identification code, Department of Transportation (DOT) Specification number (if packaging is exempt from UN standard packaging) (49 Code of Federal Regulations), or DoD Certification of Equivalency (COE) as applicable.
(Copies of this document are available on line at www.ecfr.gov.)
fGross weight of packaged item(s)
gSpecific DOT labels, if required
hIf a DOT special permit or exemption applies, give number and to what it applies
iIllustration of packing and shipping containers
3.2.15LimitationsSpecial storage or shipping limitations.
3.2.16Test dataHazard classification test data.
3.2.17Responsible individualTyped name, signature, and company of individual responsible for accuracy of the above data.
3.3Changes in itemsWhen hazard classification has been established for a basic item, a change in the Part Number (P/N), or change in the prefix or suffix dash number of the item will not require an additional data package, unless the change affects major configuration or explosive type and quantity. Minor changes will be explained in a letter narrative indicating why a change in classification is not warranted.
Schema v3.0Community-maintained · Verify against ASSIST 