DI-SAFT-82193

Occupational Safety and Health Plan

Specifies the format and content for a contractor-prepared Occupational Safety and Health Plan describing the tasks and activities required to meet safety and health program requirements at the Combined Tactical Training Ranges.

Approval DateMarch 22, 2018

AMSC NumberN9910

Preparing ActivitySH

Project NumberSAFT-2018-002

OPR—

DTIC Applicable—

GIDEP Applicable—

Limitation—

Applicable Forms—

Approval Limitation—

Form Version—

DID Formatfree_text

963C CompliantYes

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

The Occupational Safety and Health Plan will provide the Government with description of the tasks and activities required to meet the Occupational Safety and Health Program requirements at the Combined Tactical Training Ranges (CTTR).

This data item description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

Preparation Instructions

1Reference documentsThe applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendment and revision shall be as reflected in the contract.

2FormatThe plan shall be in contractor format.

3ContentThe Occupational Safety and Health Plan shall include the following:

3.1Documented process and descriptionDocumented process and description to ensure continuing regulatory compliance with safety and health regulations.

3.2Description of the closed loop corrective actionDescription of the closed loop corrective action system approach to prevent reoccurrences.

3.3Safety Administration

3.4Safety Training

3.5Safety Education and Promotion

3.6Safety Engineering

3.7Safety Equipment, Standards, and Codes

3.8Inspections

3.9Accident/Incident Investigation and Reporting

3.10Accident Analysis

3.11Fire Prevention and Suppression

3.12Personnel Assignments

3.13Hazard Detection, Analysis, and Reporting

3.14Emergency Evacuation

4The Plan shall include the training programThe Plan shall include the training program that will be implemented to ensure safety at the Combined Tactical Training Ranges (CTTR). The training program description shall include the following:

4.1Occupational Health Standards in the Work Place

4.2Vehicle Operations on the Ranges(this includes Heavy Equipment, 4-wheel drive vehicles, ATV's on ordnance ranges)

4.3Flight Line Safety

4.4Emergency Medical Care

4.5Emergency Shower and Eye Wash Procedures

4.6Radio Frequency (RF) Radiation Hazards

4.7Disaster Readiness and Evacuation

4.8Combustible and Flammable Materials (Paints, Solvents, etc.)

4.9Accident/Damage Reporting Procedures

4.10LASER Safety

4.11Range Safety(Ordnance safety, Unexploded Ordnance (UXO) safety, two man rule, etc.)

4.12Tower/Platform Safety-Conduct

4.13Safety at Heights

4.14Cardiopulmonary resuscitation (CPR) and First Aid

4.15Hazardous Material

4.16Exposure to Noxious/Toxic Compounds

4.17Fire Prevention/Fighting

4.18Hazard Detection, Analysis, and Reporting

4.19Water Survival Training

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer