DI-SESS-80567B
Subsystem Design Analysis Report
This report evaluates the design approach for configuration items or subsystems, providing government visibility during system acquisition analysis and other developmental efforts.
Approval DateJune 10, 2014
AMSC NumberF9469
Preparing Activity11 (AFLCMC/EZFA)
Project Number—
OPR—
DTIC ApplicableYes
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
This report is used to evaluate the design approach for the configuration item or subsystem and to provide visibility to the government. The data may also be used to formulate additional technical direction to the design activity. This report is normally prepared during the analysis effort for each configuration item or subsystem during system acquisition. It may also be applicable to other developmental efforts. This is a REV B to previous DID Area GDRQ which has been replaced by SESS. This DID supersedes DI-GDRQ-80567A.
Preparation Instructions
1Reference documents.The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions shall be as specified in the solicitation or contract.
2Format.This DID contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
2.1The report shall be structured to cover each of the major subsections of the design analysis task separately.The analysis report shall correlate the design requirements with the system requirement and any specified requirement for the subsystem or configuration item. The report shall describe or reference all related data (sketches, preliminary drawings, schematics, functional diagrams) necessary for portrayal of the analysis or to aid in an understanding of the analysis.
2.2The report shall conform to the specific requirements of ANSI/NISO Z39.18 as stated in the Contract Data Requirements List (CDRL) (DD Form 1423).
3Content.The report shall include the following:
3.1Objective of the analysis;
3.2Description of the items involved, including adequate drawings, schematics, and computer print-outs, to support the analysis;
3.3Specification of design constraints and assumptions imposed on the analysis;
3.4Discussion of the evaluation and analysis procedure, method, or technique used, and its probable accuracy, explained by sample calculations;
3.5Identification of source material used in the analysis;
3.6Results of the analysis, to include the following:
3.6.1Predicted performance related to requirements;
3.6.2Design impact and any constraints which influence other subsystems or configuration items;
3.6.3Producibility considerations;
3.6.4Problems encountered or revealed, and suggested solutions.
Schema v3.0Community-maintained · Verify against ASSIST 