DI-SESS-81002F
Developmental Design Drawings/Models and Associated Lists
Developmental Design Drawings/Models and Associated Lists define engineering design approaches, which support design analyses and the development of prototype hardware.
Approval DateFebruary 26, 2013
AMSC NumberA9349
Preparing Activity—
Project Number—
OPRAR
DTIC Applicable—
GIDEP Applicable—
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatdd_form_1664
963C CompliantNo
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Related
DI-SESS-81000EDI-SESS-81001EDI-SESS-81003E
Description & Purpose
This Data Item Description (DID) contains the format and content preparation instructions for Developmental Design Drawings/Models and Associated Lists resulting from the work task described in 5.3.3.2 of MIL-STD-31000.
Application & Interrelationship
This DID is applicable to acquisitions of military systems, equipment, and components. It is intended for use primarily during the concept/development phase of the DoD materiel life cycle. It is not intended that all the requirements contained herein should be applied to every program. This DID should be tailored to the minimum data requirements of the applicable contract or purchaseorder.
Use & Relationship
Developmental Design Drawings/Models and Associated Lists define engineering design approaches. They are used to support design analyses and the development of prototype hardware.
Preparation Instructions
1Reference Documents.The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the ASSIST database, http://assist.daps.dla.mil, at the time of the solicitation; or, for documents not included in ASSIST, as stated herein.
2General.Developmental Design Drawings/Models and Associated Lists shall be in accordance with MIL-STD-31000 and the TDP Option Selection Worksheet incorporated into the contract.
3Format.Developmental Design Drawings/Models and Associated Lists shall be in either the contractor's or the Government's format as specified on the TDP Option Selection Worksheet incorporated into the contract or purchase order.
4Content.Developmental Design Drawings/Models and Associated Lists shall define an engineering design approach in detail. These drawings shall:
4.1Support the evaluation of the inherent ability of the design approach to meet the stated military requirement.
4.2Support the development of prototype hardware, including computer software if applicable, for test or experimentation.
4.3Describe any materials or processes, which must be developed as a result of the design approach.
4.4Identify any unique processes required by the design approach.
5CAGE code and document numbers.Developmental Design Drawings/Models and Associated Lists shall be identified with the contractor's CAGE code and contractor document numbers or with a Government CAGE code and Government document numbers as specified in the TDP Option Selection Worksheet incorporated in the contract or purchase order.
6Selection of drawings.The types of drawings to be prepared will vary according to the complexity of the design approach and may range from simple sketches to complex drawings. The TDP Option Selection Worksheet incorporated in the contract or purchase order will specify whether the contractor or the Government is responsible for selecting the types of drawings and Associated Lists to be prepared.
7Control Drawings.Control drawings need not be prepared for vendor items or nonstandard parts. Applicability of Standards. When specified on the TDP Option Selection Worksheet incorporated into the contract or purchase order, Developmental Design Drawings/Models and Associated Lists shall conform to the requirements of ASME Y14.100, or, if applicable, ASME Y14.100 and Appendices B through E, as required, ASME Y14.34, and ASME Y14.41.
Schema v3.0Community-maintained · Verify against ASSIST 