DI-SESS-81721

Part Configuration Analysis Report

Specifies the format and content for a Part Configuration Analysis Report used to evaluate and determine the inherent reliability designed into each electrical part used in a high reliability program.

Approval DateNovember 29, 2006

AMSC Number7675

Preparing Activity—

Project Number—

OPRNS/I5231

DTIC ApplicableNo

GIDEP ApplicableNo

Limitation—

Applicable FormsNone

Approval Limitation—

Form Version—

DID Formatfree_text

963C CompliantNo

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

The purpose of this analysis is to evaluate and determine the inherent reliability designed into each part used in a high reliability program.

The report shall separately cover each electrical part type and number. Parts that are from the same vendor and are identically constructed may be combined under one report. Only one report is required per part number but any change in construction of a part will require an update of the configuration analysis for that part.

This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract and NSA Standard Number 77-46, "Configuration Analysis" (entire document).

Preparation Instructions

1Reference DocumentsThe applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as stated herein. NSA Standard Number 77-46, "Configuration Analysis," current edition, is available at NSA/I5224, Information Management Services, 9800 Savage Rd, Suite 6718, Fort Meade, Md. 20755-6718.

2FormatThe report shall be in the contractor's format.

3ContentThe Part Configuration Analysis Report shall contain the following information:

3.1Title pageThe report shall contain a title page for each electrical part type and number, and the following information.

aReport title, including equipment designator in capital letters

bPart numbers covered by the report

cDate code of the part dissected

dName of author and official title

eDate report was prepared

fActivity preparing the report

gContract number

hApproval official name, signature and title

iAppropriate security classification

3.2PhotographsThe following photographs shall be included in the report.

aDevice as received

bCross section of device

3.3Device cut-a-way sketch and itemized table of materialsThe sketch shall be labeled to illustrate where the materials from the table are located on the sketch.

3.4Manufacturer's process flowThe report shall include a block diagram of the manufacturer's process flow.

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer