DI-SESS-82286
Power Source Quality Analysis Report
Documents the predicted power quality of an electrical power system as compared to the standard power characteristics defined by MIL-STD-704 to verify interoperability of electrical power sources and utilization equipment.
Approval DateAugust 15, 2019
AMSC NumberN10070
Preparing ActivityAS
Project NumberSESS-2019-036
OPR—
DTIC Applicable—
GIDEP ApplicableNo
LimitationNone
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
The Power Source Quality Analysis Report documents the predicted power quality of an electrical power system as compared to the standard power characteristics defined by MIL-STD-704. The data will be used to verify the interoperability of electrical power sources and utilization equipment
This Data Item Description (DID) contains the format, content and intended use information for the Power Source Quality Analysis Report resulting from work tasking described by the contract statement of work.
Preparation Instructions
1Reference DocumentsThe applicable issue of the documents cited herein, including their approval dates of any applicable amendments, notices, and revisions shall be as specified in the solicitation or contract.
(Copies of the Department of Defense Interface Standard, MIL-STD-704, Aircraft Electric Power Characteristics are available online at https://quicksearch.dla.mil/)
2FormatThe contractor's format is acceptable.
3ContentThe report shall include the following information:
3.1A description of the model
3.2A description of the methods used to generate the model
3.3A justification of the validity of the selected modeling approach
3.4The results of modeling the electrical power systemincluding:
3.4.1Power quality of each electrical power source within the system performance during all operating conditionsincluding source failures
3.4.2A comparison of the power quality results to the power quality limits in MIL-STD-704
3.4.3The ability of system utilization equipment to operate when provided with nominal, abnormal, and emergency power from each power source within the system
3.4.4The limits of the ability of system utilization equipment to handle transient conditions outside of MIL-STD-704
3.4.5Performance of the power regulation equipment when connected to the utilization equipmentincluding:
3.4.5.1Regions of stable operation
3.4.5.2Amount of positive control margin
3.4.6The control logic and states of the electric power system including operation during normal, abnormal, and source failure conditions
Schema v3.0Community-maintained · Verify against ASSIST 