DI-SESS-82316
Ninety-Day Report - Production, Qualification, and Engineering Testing
Specifies the ninety-day test schedule information required for units subject to Production, Qualification, Engineering Change Proposal, and Engineering Testing using government test facilities.
Approval DateMay 14, 2020
AMSC NumberN10179
Preparing ActivityAS
Project NumberSESS-2020-028
OPR—
DTIC ApplicableNo
GIDEP ApplicableNo
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Supersedes
—Related
—Description & Purpose
—
Application & Interrelationship
—
Use & Relationship
The Ninety Day Report schedule information is required for units that are to be subjected to Production, Qualification, Engineering Change Proposal (ECP), and Engineering Testing (engineering testing utilizing government test facilities only). The information is required for items that are proposed for testing within the following 90 days.
This Data Item Description (DID) contains format and content, and intended use information for the data deliverable resulting from the work task described in the contract.
Preparation Instructions
1Reference DocumentsNone.
2FormatThe report shall be in Microsoft (MS) Excel format, Arial 10 point font and all cells set to wrap text, Columns A, B, L, and M are reserved and will be left blank. Note that Table 1 below is shown with the columns hidden.
3ContentThe report shall contain the following:
3.1Title Rows
3.1.1Row #1
3.1.1.1FontBold.
3.1.1.1.1TitleCompany name, 90-day report, and day of week followed by date created.
3.1.2Row #2
3.1.2.1FontBold.
3.1.2.1.1TitleTest location and months covered reported.
3.2Data Header Row
3.2.1Column C
3.2.1.1TitleAN/SSQ & CONT #.
3.2.1.2"AN/SSQ" represents the sonobuoy type"AN/SSQ" represents the sonobuoy type Q-36, 53, 62, 101, or 125; lowest type # first.
3.2.1.3"CONT #" represents the last 7 digits"CONT #" represents the last 7 digits of the contract number.
3.2.2Column D
3.2.2.1Title# TO TEST.
3.2.2.2"# TO TEST" represents the quantity"# TO TEST" represents the quantity of sonobuoys to be tested.
3.2.3Column E & F
3.2.3.1Title"ETA @ SITE / DAY DATE".
3.2.3.2"ETA @ SITE" represents estimated time"ETA @ SITE" represents estimated time of arrival at the test site or site receiving location.
3.2.3.3"DAY DATE" represents the day of"DAY DATE" represents the day of the week and date of ETA.
3.2.4Column G
3.2.4.1TitleDCMA DATE.
3.2.4.2"DCMA DATE" represents the date or"DCMA DATE" represents the date or estimated date of lot test sample selection.
3.2.5Column H
3.2.5.1Title45-DAY CLOCK.
3.2.5.2"45-DAY CLOCK" represents 45 days after"45-DAY CLOCK" represents 45 days after lot sample selection and date of DCMA final inspection.
3.2.6Column I
3.2.6.1TitleMFG.
3.2.6.2"MFG" represents the abbreviated Manufacturer"MFG" represents the abbreviated Manufacturer Name.
3.2.7Column J
3.2.7.1TitleTEST TYPE.
3.2.7.2"TEST TYPE" represents the type of"TEST TYPE" represents the type of test to be conducted.
3.2.7.3PRODProduction Lot Acceptance.
3.2.7.4QUALPerformance Verification & Validation.
3.2.7.5ECPEngineering Change Proposal.
3.2.7.6ENGContractor Engineering.
3.2.7.7TBDTo Be Determined by NAWC.
3.2.8Column K
3.2.8.1TitleLot #.
3.2.8.2"Lot #" represents the production lot"Lot #" represents the production lot number.
3.2.9Column N
3.2.9.1TitleNOTES.
3.2.9.2"NOTES" represents place holder for"NOTES" represents place holder for any comments, special requests, or general information.
3.3Please see Table 1 belowPlease see Table 1 below. Note that a separate spreadsheet is required for each test location.
3.3.1NAWC Crane Lab/Env.
3.3.2NAWC Crane RF Pond.
3.3.3San Clemente Island.
3.3.4Etc.
References
—
Figures
Figure Table 1. 90 Day Report - Example
Schema v3.0Community-maintained · Verify against ASSIST
Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer
Verify against ASSIST·GitHub·About·Disclaimer