DI-SESS-82379
Required Navigation Performance (RNP) Compliance Analysis
Provides an analysis of system performance accuracy, containment integrity, containment continuity, and containment compliance evaluation in accordance with RTCA DO-236C.
Approval DateMarch 14, 2022
AMSC NumberN10307
Preparing ActivityAS
Project NumberSESS-2022-013
OPR—
DTIC Applicable—
GIDEP Applicable—
Limitation—
Applicable Forms—
Approval Limitation—
Form Version—
DID Formatfree_text
963C CompliantYes
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Application & Interrelationship
—
Use & Relationship
The Required Navigation Performance (RNP) Compliance Analysis provides an analysis of system performance accuracy, containment integrity, containment continuity, and containment compliance evaluation in accordance with RTCA DO-236C, Sections 4.1.2, 4.2, 4.3, and 4.4.
This Data Item Description (DID) contains the format, content, and intended use information for the data deliverable resulting from the work task described in the contract statement of work (SOW).
This analysis will be used to show compliance to the system performance requirements contained in the NAVAIR System Specification for Performance-Based Navigation
Preparation Instructions
1Reference DocumentsThe applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions shall be as specified in the contract. The documents cited below establish the baseline for this DID's content.
1.1RTCA DO-236C, Minimum Aviation System Performance Standards: Required Navigation for Area Navigation, dated June 19, 2013
2FormatThe RNP Compliance Analysis shall be in contractor's format, unless the RNP system includes the Government Furnished Information (GFI) Flight Management Function (FMF) Application, then the format shall be government supplied.
3ContentThe analysis shall include:
3.1System Description - to include
3.1.1Systems contributing to RNP compliance
3.1.2Subsystems contributing to RNP compliance
3.4System Configuration Identification
3.5Functional Hazard Analysis
3.6System Safety Assessment
3.7Certification Basis and Means of Compliance
3.8Assumptions Used in the Analysis
3.9Limitations of the Analysis
3.10Performance Accuracy Compliance in accordance with RTCA DO-236C Section 4.2
3.11General Containment Compliance in accordance with RTCA DO-236C Section 4.3
3.12Containment Integrity and Continuity Evaluation in accordance with RTCA DO-236C Section 4.4
Schema v3.0Community-maintained · Verify against ASSIST 