DI-SESS-82504

Mid Aft Tail Test Set (MATTS) Redesign Verification Plan

Documents the approach for verifying that the redesign MATTS station meets all applicable requirements, and defines the format, content, and intended use information for the resulting data product.

Approval DateOctober 30, 2025

AMSC NumberN10605

Preparing ActivityAS

Project NumberSESS-2025-041

OPR—

DTIC Applicable—

GIDEP Applicable—

Limitation—

Applicable Forms—

Approval Limitation—

Form Version—

DID Formatfree_text

963C CompliantYes

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Supersedes

—

Description & Purpose

—

Application & Interrelationship

—

Use & Relationship

The plan documents the approach for verifying the redesign MATTS station meets all applicable requirements.

This Data Item Description (DID) contains the format, content, and intended use information for the data product resulting from the work task described in the contract Statement of Work (SOW).

Preparation Instructions

1Reference documentsRequirements Traceability Verification Matrix. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2FormatThe plan shall be in contractor's format.

3ContentThe plan shall contain the following:

3.1Description of the System

3.2Requirement to verification activity traceability

3.2.1For verification via inspection, include

3.2.1.1Standard documentation, or drawing against which inspection will be performed

3.2.2For verification via analysis include

3.2.2.1Assumptions

3.2.2.2Rationale for approach

3.2.3For verification via test include

3.2.3.1Assumptions and constraints

3.2.3.2Facilities and resources required

3.2.3.3Data required

3.2.3.4Test Equipment required

3.2.3.5Configuration of item under test

3.2.4For verification via demonstration include

3.2.4.1Assumptions and constraints

3.2.4.2Facilities and resources required

3.2.4.3Configuration of item under test

3.2.5For verification via similarity include

3.2.5.1Previous verification activity being leveraged

3.2.5.2Rationale on why design change does not invalidate previous verification

3.2.6For verification via modeling and simulation include

3.2.6.1Assumptions and constraints

3.2.6.2Verification, validation, and accreditation approach for simulations

3.2.6.3Limitations of Modeling & Simulation (M&S)

3.3Verification activity to anticipated resultant documentation traceability

3.4Flow of all verification activities

3.5Notional scheduling and locations of all verification activities

References

—

Schema v3.0Community-maintained · Verify against ASSIST

Community-maintained — not an official government database.
Verify against ASSIST·GitHub·About·Disclaimer